Operation of your KEITH® Running Floor II® Unloader

UNLOADING
1. Before beginning to unload, make sure the trailer door is open.
2. To unload with your KEITH® Running Floor II® system, pull the control valve handle all the way out.
3. Make sure that the ball valve, located between the pressure and return lines, is in the closed (run) position. This ball valve is used for the emergency shut-off.
4. Engage the P.T.O., then bring the tractor engine up to the predetermined
unloading RPM. Your trailer floor should now be operating.
5. To stop the floor at any time during the loading or unloading process, switch the ball valve to the open (stop) position.

LOADING
1. To load with your bi-directional KEITH® Running Floor II® system, simply turn
the control valve handle parallel to the ground and push it all the way in. Then follow instructions 3, 4 and 5 listed above.

!!Note!!
Make sure the trailer door is open BEFORE starting the floor or the trailer
door may be damaged. The nose of the trailer may also be damaged by the load force when loading.